CHALLENGER I – Cable Lay Barge Pervious 1 | 2 | 3 | 4 Next
Challenger I is a purposely built submarine cable lay barge, designed to perform a broad range of shore-end operation.
Challenger 1 can either configurate to use a burial sled or a vertical injector, capable to bury cables from 1.5m to 10.0m below seabed. She can also configurate as a submarine cable work barge to perform Route Clearance, Cable Detection, PLIB and Cable Repair operations.
|
|
General |
License
|
Hong Kong Local License |
Dimensions |
L.O.A.
|
45.7m
|
Breadth |
18.9m |
Depth |
3.35m |
Draft (Maximum)
|
2.94m |
Deck Loading Capacity
|
12MT/m2
|
Mooring System
|
Mooring Arrangement
|
6-point mooring system |
Forward Mooring Winch
|
2 x single drum, 20MT (mid-drum) capacity, complete with 800m wire rope |
Winch Control System
|
6 x Local control. Hydraulic system |
Anchor
|
2 x 3MT Delta Flipper and 4 x 3MT Delta Flipper |
Barge Management System |
DGPS
|
1 x Trimble SPS-461 Heading & Positioning Receiver |
Telemetry & Position Monitoring |
Monitor Station equipped with telemetry for Position Monitoring and Anchor Handling |
Cable Lay / Burial Capability |
Maximum cable size
|
220mm O.D. |
Cable Engine |
1 x 2MT or 1 x 5MT or 1 x 8MT Wheel type |
Joint Shed |
1 x for power cable jointing or 1 x for optical fiber cable splicing |
Cable handling System |
Cable Drum Support Stand with hydraulic driven Motor, rollers and chute |
Burial Tools |
Burial Sled up to 5m burial depth or Vertical Injector up to 10m burial depth |
Machinery |
Generators
|
1 x 222kW System voltage: 380V, 3 phases |
Lifting Devices |
Main Crane
|
1 x 150MT Crawler crane |
Aux. Crane
|
1 x 45MT HIAB hydraulic knuckle crane
|
Safety Equipment
|
Life Vests
|
For 24 persons
|
Accommodation
|
Accommodation |
Suitable for 24 persons in 2, 4 and 6 man cabins
|
Galley |
Fully equipped Galley
& Freezers |
Common Facilities |
Laundry, Common Toilets & Stores |
Monitor Station & Offices |
Fully integrated Monitor Station, Meeting room & Conference room |
Pervious 1 | 2 | 3 | 4 Next
|